Reveal 82+ Exquisite Changing Bathroom Sink Taps To Mixer Top Choices Of Architects

Changing bathroom sink taps to mixer is a great way to update the look and functionality of your bathroom. Traditional separate hot and cold taps can be difficult to use and can also be a breeding ground for germs. By switching to a mixer tap, you not only improve the aesthetics of your bathroom, but you also make it more hygienic and convenient to use. In this article, we will guide you through the process of changing your bathroom sink taps to mixer.

If you're ready to make the switch from traditional taps to a mixer tap, here's a step-by-step guide to help you out:

Step 1: Turn off the water supply to your taps. This can usually be done by locating the shut-off valve under your sink.

Step 2: Remove the old taps by unscrewing them from the sink. You may need to use a wrench for this step.

Step 3: Clean the area where the old taps were attached to the sink. This will ensure a smooth surface for the new taps.

Step 4: Install the new mixer tap. Follow the manufacturer's instructions carefully to ensure proper installation.

Step 5: Connect the hot and cold water supply lines to the appropriate inlets on the mixer tap.

Step 6: Turn the water supply back on and test the new tap to make sure it's working properly.

Changing your bathroom sink taps to mixer can be a DIY project, as long as you have the right tools and knowledge. Here are some of the tools you will need for the job:

Adjustable wrench - for removing the old taps and installing the new ones

Plumber's tape - to ensure a tight seal on the connections

Screwdriver - for removing screws or any other components that may be holding the old taps in place

Rags or towels - to clean up any spills or leaks during the installation process

It's important to note that if you're not confident in your DIY skills, it's best to hire a professional plumber to do the job for you. This will ensure that the installation is done correctly and prevent any potential damage or leaks.

If you currently have separate hot and cold taps in your bathroom, you may be wondering why you should switch to a mixer tap. Here are some reasons why replacing your bathroom sink taps with a mixer tap is a great idea:

1. Convenience: With a mixer tap, you can easily adjust the water temperature and flow with just one handle, making it more convenient to use.

2. Improved hygiene: Traditional taps with separate handles can be a breeding ground for germs. With a mixer tap, you only have to touch one handle, reducing the spread of germs.

3. Aesthetics: Mixer taps come in a variety of designs and finishes, allowing you to choose one that matches your bathroom's style and adds a touch of elegance.

If you're still unsure about how to change your bathroom sink taps to mixer, here's a more detailed step-by-step guide:

Step 1: Gather all the necessary tools and materials for the job.

Step 2: Turn off the water supply to your taps.

Step 3: Remove the old taps by unscrewing them from the sink.

Step 4: Clean the area where the old taps were attached to the sink.

Step 5: Install the new mixer tap, following the manufacturer's instructions.

Step 6: Connect the hot and cold water supply lines to the appropriate inlets on the mixer tap.

Step 7: Turn the water supply back on and test the new tap to make sure it's working properly.

As mentioned earlier, you will need some tools to successfully change your bathroom sink taps to mixer. Here's a quick list of the tools you will need:

Adjustable wrench

Plumber's tape

Screwdriver

Rags or towels

If you don't already have these tools, you can easily find them at your local hardware store.

The cost of changing your bathroom sink taps to mixer will depend on a few factors, such as the cost of the new mixer tap, any additional tools or materials needed, and whether you decide to hire a professional plumber. On average, the cost can range from $100 to $300. However, this is a one-time cost that will improve the functionality and aesthetics of your bathroom in the long run.

Switching to a mixer tap in the bathroom can bring about many benefits, including:

1. Convenience: As mentioned earlier, a mixer tap is more convenient to use, especially for children or those with limited mobility.

2. Better water control: With a mixer tap, you have better control over the water temperature and flow, allowing for a more enjoyable and comfortable experience.

3. Improved hygiene: By only having to touch one handle, you reduce the spread of germs and bacteria in your bathroom.

4. Modern look: Mixer taps come in a variety of modern and stylish designs, giving your bathroom an updated and elegant look.

While changing your bathroom sink taps to mixer may seem like a simple task, there are a few common mistakes to avoid to ensure a successful installation:

1. Not turning off the water supply: This is a crucial step that must not be skipped to avoid any potential water damage or accidents.

2. Using the wrong tools: Make sure to use the appropriate tools for the job to prevent any damage to your new mixer tap.

3. Not following the manufacturer's instructions: Each mixer tap may have different installation instructions, so make sure to read and follow them carefully.

Deciding whether to hire a professional plumber or do the job yourself can be a tough decision. While DIY may save you some money, hiring a professional plumber can ensure that the job is done correctly and prevent any potential issues in the future. If you're not confident in your DIY skills, it's best to leave it to the experts.

In conclusion, changing your bathroom sink taps to mixer can bring many benefits to your bathroom. By following our step-by-step guide and avoiding common mistakes, you can successfully make the switch and enjoy a more convenient and hygienic bathroom experience. Remember, if you're unsure or not confident in your DIY skills, it's best to hire a professional plumber to ensure a proper installation.