Replacing the interior door handles of a 2003 Ford Expedition is a relatively straight-forward repair. It’s a great project for a weekend “carpenter” and one that can save you a good deal of money. With the right tools and a little patience, you can easily complete this repair. To begin, you’ll need to remove the interior door panel. Ford Expedition door handles are bolted to the panel, so you’ll have to do some work to get them off. You’ll then need to decide which interior door handle to get to replace the old one. The Guardian Automotive 03-06 Ford Expedition 4-Door Interior Door Handle makes an excellent choice. It is low-priced and designed specifically for 2003 - 2006 Ford Expeditions. It even comes with detailed installation instructions, so you don’t even have to be a mechanic to install it. If you’re looking for something a bit flashier, though, consider the 2003-2006 Ford Expedition & Lincoln Navigator Black Interior Door Handle. It has a more modern look that will spruce up the interior of your Ford Expedition. Replacing 2003 Ford Expedition Interior Door Handles
Replacing 2003 Ford Expedition Interior Door Handles
Once you’ve selected the new handle, it’s time to start replacing the old one. The first step is to remove the door panel. You can do this by unscrewing the screws at the back and bottom of the panel. You might need to use a flat-head screwdriver or socket wrench to do this, depending on your car. Once you’ve removed the screws, you can then gently pry the panel off the door. Now, you can start removing & replacing the old handle. Most handles are attached with a few screws, so you’ll need to unscrew them to get the handle off. Once they’re off, you can slide the brass handle rods off the old handle. Now, it’s time to install the new handle. Slide the rods into the new handle first. Make sure they’re firmly in place. Then, screw the handle back onto the panel. Finally, reattach the door panel and you’re done! How to Remove & Replace Ford Expedition Door Handles | Interior Door Handle Replacement
Ford Expedition Door Handles
Replacing both the interior and exterior door handles requires removal of the door panel. The 2003-2006 Ford Expedition Interior Door Handle Replacement Insert Pair is mounted on the panel and inserted into the handles. To remove it, unscrew the handle from inside the car and draw the insert off. To replace it, you need to insert the new insert into the handle holes and then screw it back into the panel. You can then slide the handle back in and secure it with the screws. Finally, reattach the door panel and you’re done. 2003-2006 Ford Expedition Interior Door Handle Replacement Insert Pair
How to Remove & Replace Interior Door
To replace the interior door handle on a 2003 Ford Expedition, you’ll need to remove the door panel first. Unscrew the screws located at the bottom and back of the panel to gain access to the handle. Next, you’ll need to remove the screws attaching the handle to the panel. You can then carefully pull the handle away from the panel. Once you’ve done that, you can install the new handle by placing it in the same location and reattaching the screws. Finally, reattach the door panel and you’re all done. How to Replace the Interior Door Handle on a 2003 Ford Expedition
Guardian Automotive 03-06 Ford Expedition 4-Door Interior Door Handle
Are you looking for an interior door handle replacement for a 2003 - 2006 Ford Expedition & Lincoln Navigator? If so, look no further than the 2003 - 2006 Ford Expedition & Lincoln Navigator Interior Door Handle Replacement. This handle is specifically designed for 2003 - 2006 Ford Expeditions and Lincoln Navigators, so you can be sure it fits perfectly. To install the handle, remove the door panel first using a flat head screwdriver or socket wrench. Unscrew the screws holding the handle in place, and slide the handle out. Place the new handle in the same location and secure it with the screws. Reattach the door panel and you’re all done. 2003 - 2006 Ford Expedition & Lincoln Navigator Interior Door Handle Replacement
2003-2006 Ford Expedition & Lincoln Navigator Black Interior Door Handle
Replacing the rear interior door handle on a 2003 Ford Expedition isn’t that difficult, though it can be a bit challenging. To begin, you’ll need to remove the door panel. To do this, unscrew the screws at the back and bottom of the panel. Once the screws are removed, you can gently pry the panel off the door. Now you’ll be able to access the handle. Unscrew the handle from the panel and slide it out of its mounting hole. You can then slide the new handle in and reattach the screws. Put the door panel back on, and you’re done. Replacing 2003 Ford Expedition Rear Interior Door Handle
How to Remove & Replace Ford Expedition Door Handles
Replacing an interior door handle of a 2003-2006 Ford Expedition can be done with a few basic tools and some patience. First, you’ll need to remove the door panel. You can do this by unscrewing the screws located at the bottom and back of the panel. Once the screws are removed, you can gently pry the panel away from the door. Next, you’ll need to unscrew the screws holding the handle in place. Again, use a screwdriver or a socket wrench to do this. Then slip the handle out of the door. Lastly, slide the new handle in and secure it with the screws. Reattach the door panel, and you’re done. How to Replace Interior Door Handle on 2003-2006 Ford Expedition
Interior Door Handle Replacement
Replacing Your 03 Expedition Interior Door Handles
Replacing the
interior handrail
on your 03 Expedition can be an affordable and efficient way to make the interior of the vehicle look more attractive. The
Expedition
features a series of door handle types, including a handle with a latch, a longer armature, and a handle that includes a keyhole. Each of them can offer an improved level of door security and access.
Replacing the
interior door handle
on your 03 Expedition can be a simple process, and the time required can depend on your level of familiarity with automotive repair. Before beginning your replacement, a few key steps should be taken to ensure a successful outcome.
Tools You'll Need for the 03 Expedition Interior Door Handle Replacement
Locating the 03 Expedition's Interior Door Handle
The interior door handle of your 03 Expedition is most often located along the lower left or right side of the interior of the vehicle. It can also be located near the center of the door, depending on the type. The exact location of the interior door handle may vary between model years and vehicle makes.
The 03 Expedition interior door handle can be more challenging to locate than other interior door handles, and it is important to take your time when attempting to locate it. A flashlight or a diagnostic scanner can be helpful in locating this component.
Removing the Interior Door Handle
Once the interior door handle has been located, the next step is to remove it. Disconnect the vehicle's battery and ensure that no power is flowing to the handle. Then, use a wrench or a socket set to remove the screws that secure the interior door handle to the vehicle. Repeat this process for all screws before trying to remove the handle from the door panel.
Installing the New Interior Door Handle
Once the old interior door handle has been removed, the new one can be attached. If the new handle requires additional components, such as a latch or keyhole, ensure that these are first attached before installing the handle. Then, use the same screwdriver or socket set to attach the handle to the door panel.
Testing the New Handle
After attaching the new interior door handle, it is important to test the handle. Make sure that the handle is able to lock and unlock the door without difficulty. Additionally, check to ensure that the handle is securely attached. If there is any issue with the door handle, adjustments may need to be made.
