Best Of 71+ Beautiful Install Bathroom Vanity Before Or After Tiling Voted By The Construction Association

When it comes to renovating your bathroom, one of the most important decisions you'll have to make is whether to install the bathroom vanity before or after tiling. While there are pros and cons to both options, ultimately it will depend on your personal preferences and the specifics of your bathroom remodel. Let's take a closer look at the factors to consider when making this decision.

If you've decided to install your vanity before tiling, here's a step-by-step guide to help you through the process:

Step 1: Measure the dimensions of your vanity and mark them on the wall where you want it to be installed.

Step 2: Locate and mark the position of the studs on the wall using a stud finder.

Step 3: Assemble your vanity according to the manufacturer's instructions.

Step 4: Place the vanity in its designated spot and level it using a carpenter's level.

Step 5: Secure the vanity to the wall by drilling screws through the back panel and into the marked studs.

Step 6: Connect the vanity's plumbing to the existing water supply and drain pipes.

On the other hand, if you choose to install your vanity after tiling, here's what you need to do:

Step 1: Measure and mark the dimensions of your vanity on the tiled wall.

Step 2: Use a tile saw to cut out the marked area, making sure to follow the lines accurately.

Step 3: Assemble your vanity and place it in the designated spot, checking for levelness.

Step 4: Secure the vanity to the wall by drilling screws through the back panel and into the wall studs.

Step 5: Connect the vanity's plumbing to the existing water supply and drain pipes.

Whether you choose to install your vanity before or after tiling, here are some tips to ensure a smooth and successful installation:

Tip 1: Make sure to double-check your measurements before cutting or drilling.

Tip 2: Use anchors for extra support when securing your vanity to the wall.

Tip 3: Always follow the manufacturer's instructions for assembling and installing the vanity.

Tip 4: If you're tiling after installing the vanity, make sure to use a tile gap between the vanity and the tiles to prevent any movement or damage.

Now that we've gone through the steps and tips for both options, you may still be wondering which one to choose. The truth is, there is no right or wrong answer. It ultimately depends on your personal preferences and the specifics of your bathroom remodel.

If you have a large, heavy vanity that requires precise measurements and drilling, it may be easier to install it first and then tile around it. On the other hand, if you have a smaller vanity that can easily be moved and adjusted, you may prefer to tile first and then install the vanity.

While the order of installation for your bathroom renovation will vary depending on your specific project, here is a general guideline to follow:

Step 1: Demolition and removal of old fixtures and materials.

Step 2: Plumbing and electrical work, if needed.

Step 3: Installation of new drywall and painting.

Step 4: Tiling and grouting.

Step 5: Installation of fixtures such as vanity, toilet, shower, and bathtub.

Step 6: Finishing touches and decoration.

If you do choose to install your vanity before tiling, here are some best practices to follow:

Practice 1: Make sure to use a tile gap between the vanity and tiles to prevent any movement or damage.

Practice 2: Plan ahead and make sure to leave enough space for the vanity's plumbing to fit comfortably behind the tiles.

Practice 3: Use a waterproof caulk around the edges of the vanity to prevent any water damage.

When deciding on the placement of your vanity and tiles, here are some things to keep in mind:

Consideration 1: Leave enough space between the vanity and other fixtures such as the toilet and shower for comfortable use.

Consideration 2: Make sure the vanity does not obstruct any doors or cabinets.

Consideration 3: If you have a smaller bathroom, consider using a wall-mounted vanity to save space.

Now that you know the best practices for installing your vanity and tiles, here are some general steps to follow for a successful bathroom remodel:

Step 1: Set a budget and plan out your renovation project.

Step 2: Choose your fixtures, materials, and design aesthetic.

Step 3: Hire professionals for any plumbing or electrical work.

Step 4: Complete demolition and remove old fixtures and materials.

Step 5: Install new drywall and paint.

Step 6: Install tiles and grout.

Step 7: Install fixtures and finishing touches.

No matter which option you choose, installing your bathroom vanity and tiles requires careful planning and precise execution. By following the recommended steps and best practices, you can ensure a successful and beautiful bathroom renovation. And remember, don't be afraid to seek professional help for any aspects of the project that you're not confident in completing on your own.