Find 78+ Enchanting Interior Doors Problems You Won't Be Disappointed

Sticking Interior Doors

Art Deco house designs often feature stunning interior doors that are aesthetically pleasing and practical. The most common issue encountered with these doors is that they will tend to stick. This can happen if the doors are not aligned correctly or if the weatherstripping has not been properly installed. The best way to prevent stickiness is to make sure a trained professional has installed the sliding or pocket doors.

It is also important to take the time to check if the aligned frames are too tight or if screws need to be adjusted. This may take some trial and error to find the correct angle but with some patience, most people are able to fix the sticking during installation or repair.

When it comes to exterior doors, a common problem is that the door is too tight for optimal use. This can be easily fixed by filing down the hinges until the door opens and closes smoothly and without any majestic force.

Problems with Aligning Interior Doors

Aligning interior doors can be a difficult task when it comes to art deco house designs. This is because they are intricate in construction with lots of detailed work. When there are too many wood panels, it can make the alignment even more complicated. As a result, having a professional do the installation is recommended.

To get a door aligned correctly, it is important to make sure any shims or wedges have been put into place to ensure that the door properly fits the frame. It is also important to make sure that no nails or screws are protruding from the doors that could be causing damage.

Finally, when aligning an interior door, it is best to make sure the door is level from the jamb to the top and all along the sides. This will help ensure a smooth opening and closing motion.

Interior Door Sitting Proud of Frame

Sometimes, an interior door can sit proud of the frame. This is often the case in Art Deco house designs that have angled walls. To fix this, opt for adjusting the door's hinges slightly to get it into the correct position. If adjusting the hinges does not work, adding shims or wedges into the hinges may help to create a better fit.

If the door is still sitting proud of the frame, it is likely the door needs to be removed and a skilled carpenter should be called in to do the job. Alternatively, a prop may need to be used to support the door while it is re-aligned and placed back on the frame.

It is important to take extra time to make sure the door is fitting properly in the frame before hammering or pushing the door into the frame to line up.

Noisy Doors

Noisy interior doors are a common issue with Art Deco house designs. This problem is often caused by worn-out hinges or lack of insulation in the wall. To reduce the noise, check the hinges to make sure they are properly lubricated and that the screws holding the hinges in place are tightened. Additionally, adding insulation to the walls around the door may help to reduce air leaks and therefore the noise.

If the noise is coming from the locks, try lubricating the locks with a silicone or graphite-based lubricant. Lastly, if all else fails, it may be necessary to replace the door, or at least the hinges if they are worn out.

If the door is too noisy, simply adjusting the door jamb so that it is a little looser may help to lessen the sound of the door.

Jamming Doors

Art Deco house designs typically feature intricate woodwork and this can mean that doors can be more prone to jamming. To reduce this, it is important to make sure that the door swings smoothly and that all hinges are properly fastened. It can also help to apply some heat, such as from a hair dryer, to the area around the door to try and expand it. Doing this will help to loosen any tension.

If adjusting the hinges and adding some heat does not resolve the issue, it is recommended to call in an experienced handyman or carpenter. Working together, they will be able to properly inspect the door and determine the best course of action.

In some cases, it may be necessary to completely replace the door or install a different type of door. If this is the case, be sure to speak with a professional before making any decisions.

House Designs – Types of Interior Door Styles

Art Deco house designs usually feature a variety of interior door styles. From traditional to modern styles, there is sure to be something to fit a person's individual style and budget. Traditional styles are typically made of wood and feature intricate carvings, which give them a classic look.

Modern styles, on the other hand, tend to be more streamlined and feature less-ornate detailing. These typically come in a variety of materials, such as metal, glass, and even plastic. There are many different finishes in both styles, so be sure to find the best option for the home.

When looking for door styles, it is important to consider the features of each style such as its insulation, sound reduction values, and even the security provided. All of these elements are important to consider when choosing an interior door.

Repairing or Replacing an Interior Door

If there is a problem with an interior door in an Art Deco house design, the issue should be addressed immediately. It could be something as simple as worn out hardware or if the door is damaged, it may need to be replaced.

In some cases, it will be necessary to remove and replace the entire door or replace only the hardware. If the door is in need of repair, it is best to call in a handyman to do the job. He or she will be able to properly inspect the door and determine the best course of action.

If replacing the door is the only option, consider the type of door as well as its finish, size, and other characteristics. Make sure to find a replacement door that best meets the existing style and design of the house.

Rotted Door Jambs

Rotted door jambs occur from time to time in Art Deco house designs. This is typically caused by moisture seeping into the wood, which leads to warping and rot over time. The best way to repair this is to call in a professional. He or she will be able to correctly inspect the damage and fill in any holes or replace the rotted wood.

If the door jamb is severely damaged, it may be necessary to replace the entire door jamb. When doing so, consider the existing materials and make sure to get a door jamb made from the same material. This will help to ensure a seamless transition with the existing décor and still provide the house with a classic look.

When replacing a door jamb, it is also important to check for any existing problems with the structure of the home. This includes checking for termites, foundation problems, and any existing leaks. Doing this will help to ensure the door jamb is properly installed and that the overall house remains structurally sound.

Improperly Hung Doors

When it comes to Art Deco house designs, improperly hung doors are a common problem. This usually occurs when the door is not square, or when there are gaps around the edges of the door. The best way to fix an improperly hung door is to call in a professional who can properly inspect the door alignment and make the necessary adjustments.

When deciding to hang a new door, it is important to consider how it fits into the overall house design. It is also important to make sure the door is properly sealed to reduce air leakage and to ensure a snug fit. Finally, it is a good idea to check the integrity of the frame, as this will help to ensure the door is properly secured.

It is also a good idea to consider any additional details, such as weatherstripping, when hanging the door. This will help to make sure the door is completely airtight once hung.

Weatherstripping Doors

When working with Art Deco house designs, it is important to use the right weatherstripping on interior doors. This helps to improve energy efficiency by preventing air leakage and drafts. The best way to ensure a good seal is to have the door professionally installed.

Most interior doors will come with the necessary weatherstripping already installed. However, if the weatherstripping needs to be replaced, it is best to ensure the sealant used is of the highest quality. Additionally, it is better to use a weatherstripping that is made from durable materials in order to ensure it will last as long as possible.

When weatherstripping a door, it is best to do it one time and do it right. This will ensure that the door is fully sealed and that energy costs do not increase due to air leakage.

Insulating Interior Doors

Insulation in interior doors is an important part of any Art Deco house design. A door that is not properly insulated can lead to increased energy costs due to air leakage and drafts. To prevent this, it is important to install the door correctly and to add an insulation barrier around it.

The best way to insulate a door is to use a material that is rated for temperature fluctuations. This includes materials like foam, glass, and rubber. Additionally, it is important to make sure the insulation is securely fastened to the door. This will help to ensure that the door offers optimal insulation even if temperature changes occur.

Finally, check for any air leaks around the door and make sure the weatherstripping is in good condition. This will help to keep air from escaping, which can save significant money on energy bills.