How to Use a Sunbeam Electric Mattress Pad
Sunbeam electric mattress pads are a convenient and cozy addition to any bed. They provide warmth and comfort during cold nights, helping you get a good night's sleep. However, if you've never used one before, you may be unsure of how to properly use it. Here's a step-by-step guide on how to use a Sunbeam electric mattress pad:
Step 1: Read the instructions
Before using your Sunbeam electric mattress pad, it's important to read the instructions carefully. This will ensure that you understand all the features and functions of the product, and how to use it safely.
Step 2: Prepare your bed
Make sure your bed is properly made with clean sheets. Lay the Sunbeam electric mattress pad on top of the fitted sheet, with the control cords at the foot of the bed.
Step 3: Connect the control cords
Connect the control cords to the plug on the electric mattress pad. Make sure the cords are securely attached and not tangled.
Step 4: Turn on the power
Plug the control cords into a power outlet and turn on the power. You should see a light on the control unit indicating that the mattress pad is receiving power.
Step 5: Choose your settings
Using the control unit, you can select your desired temperature and heating level. The unit will have different settings such as low, medium, and high, as well as a timer function. You can also choose to preheat your mattress pad, which will warm up your bed before you get in.
Step 6: Enjoy the warmth
Once you've selected your desired settings, wait a few minutes for the mattress pad to warm up. Then, get into bed and enjoy the cozy warmth of your Sunbeam electric mattress pad.
How to Wash a Sunbeam Electric Mattress Pad
Keeping your Sunbeam electric mattress pad clean is essential for maintaining its performance and extending its lifespan. However, since it has electrical components, it's important to follow the correct washing instructions to avoid damaging the product. Here's how to wash a Sunbeam electric mattress pad:
Step 1: Unplug the mattress pad
Before washing your Sunbeam electric mattress pad, make sure it is unplugged and disconnected from the power source. This will prevent any accidents or damage to the product.
Step 2: Remove the control cords
Remove the control cords from the mattress pad by unhooking them from the plug. Make sure not to pull on the cords too hard, as this can damage them.
Step 3: Check the care label
Check the care label on your Sunbeam electric mattress pad for specific washing instructions. It's important to follow these instructions to avoid damaging the product or voiding the warranty.
Step 4: Wash on a gentle cycle
Most Sunbeam electric mattress pads can be washed in a washing machine on a gentle cycle. Use a mild detergent and avoid using bleach or fabric softener.
Step 5: Hang to dry
After washing, hang your Sunbeam electric mattress pad to air dry. Do not put it in the dryer, as the heat can damage the electrical components. You can also lay it flat on a towel to dry.
Step 6: Reattach the control cords
Once the mattress pad is completely dry, reattach the control cords and plug them back into the power outlet. Your Sunbeam electric mattress pad is now ready to use again.
Sunbeam Electric Mattress Pad Troubleshooting
While Sunbeam electric mattress pads are known for their reliability and durability, there may be times when you encounter some issues. Here are some common problems and solutions for troubleshooting your Sunbeam electric mattress pad:
Problem: The mattress pad is not heating up
Solution: Check to make sure the control cords are securely connected to the mattress pad and the power outlet. If they are, try unplugging and plugging them back in. If the problem persists, there may be an issue with the control unit or the heating elements, and you should contact Sunbeam for assistance.
Problem: The mattress pad is not heating evenly
Solution: This can happen if the mattress pad is not laid out flat or if the heating elements are damaged. Make sure the mattress pad is properly positioned on the bed and check for any visible damage to the heating elements. If the problem continues, contact Sunbeam for assistance.
Problem: The control unit is not working
Solution: If the control unit is not turning on or responding to your commands, check the batteries and replace them if necessary. If the problem persists, there may be an issue with the control unit itself, and you should contact Sunbeam for assistance.
Problem: The mattress pad has an error code
Solution: Error codes may indicate a specific issue with your Sunbeam electric mattress pad. Check the instruction manual for a list of error codes and their corresponding solutions. If the error code continues to appear, contact Sunbeam for assistance.
Sunbeam Electric Mattress Pad Manual
If you've lost or misplaced your Sunbeam electric mattress pad manual, don't worry. You can easily find a digital version on Sunbeam's website or by contacting their customer service. Here are some key things you can find in a Sunbeam electric mattress pad manual:
Product features: The manual will list all the product features and functions, including the different heating levels, timer settings, and control unit instructions.
Instructions for use: The manual will provide step-by-step instructions on how to properly use your Sunbeam electric mattress pad, including how to connect the control cords and select your desired settings.
Care and maintenance: The manual will have specific care and maintenance instructions for your Sunbeam electric mattress pad, such as how to wash it and how to store it properly.
Troubleshooting: In case you encounter any issues with your mattress pad, the manual will have a troubleshooting section with solutions for common problems.
Sunbeam Electric Mattress Pad Not Working
If your Sunbeam electric mattress pad is not working, there could be a few reasons why. Here are some steps you can take to try and fix the issue:
Step 1: Check the power source
Make sure the control cords are properly connected to the power outlet and the mattress pad. You can also try plugging the control cords into a different outlet.
Step 2: Check the control unit
Make sure the control unit is turned on and that the batteries are not dead. If the control unit is not working, try replacing the batteries or contacting Sunbeam for assistance.
Step 3: Check the heating elements
If the control unit is working but the mattress pad is not heating up, there may be an issue with the heating elements. Check for any visible damage and contact Sunbeam for assistance.
Step 4: Check for error codes
If your Sunbeam electric mattress pad has an error code, refer to the instruction manual for solutions. If the problem persists, contact Sunbeam for assistance.
Sunbeam Electric Mattress Pad Error Codes
Sunbeam electric mattress pads have built-in safety features that will display error codes in case of any malfunctions or issues. Here are some common error codes you may encounter and their corresponding solutions:
E1 error code: This code indicates an issue with the temperature sensor. Unplug the mattress pad and plug it back in. If the error code continues to appear, contact Sunbeam for assistance.
E2 error code: This code indicates an issue with the temperature setting. Make sure the control unit is properly connected and try changing the temperature setting. If the error code persists, contact Sunbeam for assistance.
E3 error code: This code indicates a problem with the heating elements. Check for any visible damage and contact Sunbeam for assistance.
E4 error code: This code indicates an issue with the control unit. Check the batteries and replace them if necessary. If the error code continues to appear, contact Sunbeam for assistance.
Sunbeam Electric Mattress Pad Preheat Instructions
The preheat function on a Sunbeam electric mattress pad is a convenient feature that warms up your bed before you get in. Here's how to use the preheat function:
Step 1: Turn on the power
Plug the control cords into a power outlet and turn on the power. You should see a light on the control unit indicating that the mattress pad is receiving power.
Step 2: Select the preheat setting
Using the control unit, select the preheat setting. This may be indicated by a snowflake icon or a dedicated preheat button.
Step 3: Wait for the preheat
Depending on your mattress pad, the preheat function may take a few minutes to heat up. Once it's ready, the control unit will beep or the light will turn off, indicating that the preheat is complete.
Step 4: Get into bed
After the preheat is complete, get into bed and enjoy the cozy warmth of your Sunbeam electric mattress pad.
Sunbeam Electric Mattress Pad Fitted Sheet Instructions
One of the great features of Sunbeam electric mattress pads is that they come with a fitted sheet to hold the mattress pad in place. Here's how to properly use the fitted sheet for your Sunbeam electric mattress pad:
Step 1: Lay the fitted sheet on your bed
Before placing the mattress pad on your bed, lay the fitted sheet on the mattress. Make sure it is properly aligned and fitted to your bed size.
Step 2: Position the mattress pad
Place the Sunbeam electric mattress pad on top of the fitted sheet, with the control cords at the foot of the bed. Make sure the cords are not tangled and are facing the correct direction.
Step 3: Tuck in the sides
Tuck the sides of the fitted sheet under the mattress to secure the mattress pad in place. Make sure the fitted sheet is smooth and not bunched up.
Step 4: Make the bed
Once the mattress pad is securely in place, make your bed as usual with your top sheet, blankets, and pillows.
Sunbeam Electric Mattress Pad Dual Control Instructions
Some Sunbeam electric mattress pads come with dual control, which allows each side of the mattress pad to have its own control unit and settings. Here's how to properly use a Sunbeam electric mattress pad with dual control:
Step 1: Connect the control cords
Each side of the mattress pad will have its own control cords. Connect each set of cords to their respective sides of the mattress pad, making sure they are securely attached and not tangled.
Step 2: Turn on the power
Plug each set of control cords into a power outlet and turn on the power. You should see a light on each control unit indicating that the mattress pad is receiving power.
Step 3: Choose your settings
Each control unit will have its own settings for temperature, heating level, and timer. Select your desired settings for each side of the bed.
Step 4: Enjoy the warmth
Once you've selected your desired settings, wait a few minutes for the mattress pad to warm up. Then, get into bed and enjoy the cozy warmth of your Sunbeam electric mattress pad.
Sunbeam Electric Mattress Pad Timer Instructions
The timer function on a Sunbeam electric mattress pad allows you to set a specific time for the mattress pad to turn off automatically. This is a great feature for those who may forget to turn off their mattress pad or prefer not to sleep with it on all night. Here's how to use the timer function:
Step 1: Turn on the power
Plug the control cords into a power outlet and turn on the power. You should see a light on the control unit indicating that the mattress pad is receiving power.
Step 2: Select the timer setting
Using the control unit, select the timer setting. This may be indicated by a clock icon or a dedicated timer button.
Step 3: Set the timer
Sunbeam Electric Mattress Pad: The Ultimate Solution for a Comfortable and Cozy Night's Sleep
Introducing the Sunbeam Electric Mattress Pad
:max_bytes(150000):strip_icc():focal(599x0:601x2)/sunbeam-heated-mattress-pad-tout-c46978222b3940f289e4d7e70d39638b.jpg)
The Benefits of Using a Sunbeam Electric Mattress Pad

Proper Care and Maintenance

A Final Word
