Reveal 87+ Exquisite This Old House Bathroom Sink Plumbing You Won't Be Disappointed

If you have a leaky bathroom sink, it’s important to address it right away to prevent further damage. Here’s a step-by-step guide on how to fix a leaky bathroom sink, brought to you by This Old House and its expert team of plumbers.

The first thing you need to do is turn off the water supply to your bathroom sink. This can usually be done by turning the valve under the sink clockwise. Next, you’ll need to remove the faucet handle to access the valve. Use a screwdriver or an Allen wrench, depending on the type of handle, to loosen and remove it.

Once the handle is off, you will see the valve and cartridge that control the flow of water. Use pliers to remove the valve and cartridge and inspect it for any cracks or damage. If there is any damage, you will need to replace it with a new one.

Next, you’ll need to clean the valve and cartridge thoroughly with a mixture of vinegar and water. This will help remove any mineral deposits or debris that may be causing the leak. Once cleaned, reinstall the valve and cartridge and tighten it with pliers.

Finally, reinstall the faucet handle and turn the water supply back on. Test the faucet to see if the leak has been fixed. If not, you may need to replace the entire faucet to completely resolve the issue.

Installing a new bathroom sink can be a great way to update the look of your bathroom. Here’s a guide on how to install a bathroom sink, brought to you by This Old House and its expert team of plumbers.

The first step is to choose the right sink for your bathroom. Measure the space where the sink will go and choose a sink that fits both the space and your personal style. Once you have your sink, gather the necessary tools and materials, including a putty knife, plumber’s putty, silicone caulk, and a wrench.

Next, you’ll need to remove the old sink if you are replacing an existing one. Turn off the water supply and disconnect the water lines and drain pipe. Once the old sink is removed, clean the area where the new sink will be installed.

Now it’s time to install the faucet and drain assembly on the new sink. Follow the manufacturer’s instructions on how to properly install these components. Once they are in place, apply a thin layer of plumber’s putty around the edges of the sink where it will come in contact with the countertop.

Place the sink into the opening and press down firmly to secure it in place. Wipe away any excess putty with a damp cloth. Connect the water lines and drain pipe to the sink and secure them with a wrench.

Finally, apply a bead of silicone caulk around the edges of the sink to create a watertight seal. Let the caulk dry completely before using the sink.

Replacing an old, outdated bathroom faucet is a simple way to give your bathroom a fresh new look. Here’s a guide on how to replace a bathroom faucet, brought to you by This Old House and its expert team of plumbers.

The first step is to shut off the water supply to your bathroom faucet. This can usually be done by turning the valve under the sink clockwise. Next, remove the old faucet by loosening and disconnecting the water lines and any mounting hardware.

Once the old faucet is removed, clean the area where the new faucet will be installed. Then, install the new faucet according to the manufacturer’s instructions. This may involve attaching the water lines and mounting hardware.

Next, turn the water supply back on and test the faucet to make sure it is working properly. If there are any leaks, tighten the connections with a wrench.

Finally, apply a bead of silicone caulk around the edges of the faucet where it meets the sink to create a watertight seal. Let the caulk dry completely before using the faucet.

A clogged bathroom sink can be a major inconvenience. Here’s a guide on how to unclog a bathroom sink, brought to you by This Old House and its expert team of plumbers.

The first step is to remove any visible debris from the sink. Use a pair of tweezers, a paper clip, or a small wire to remove any hair, soap scum, or other materials that may be clogging the drain.

If the clog is still present, try using a plunger to loosen and remove it. Fill the sink with a few inches of water to create suction, then place the plunger over the drain and push down and pull up several times. This should dislodge the clog.

If the plunger does not work, you may need to use a drain snake to remove the clog. Insert the drain snake into the drain and use a crank or handle to push it through the pipes and break up the clog.

If the clog is still persistent, you may need to use a chemical drain cleaner to dissolve the clog. Follow the instructions on the product carefully and use caution when handling and disposing of the cleaner.

Installing a new bathroom vanity can be a great way to update the look of your bathroom and add storage space. Here’s a guide on how to install a bathroom vanity, brought to you by This Old House and its expert team of plumbers.

The first step is to choose the right vanity for your bathroom. Measure the space where the vanity will go and choose one that fits both the space and your personal style. Once you have your vanity, gather the necessary tools and materials, including a drill, screws, a level, and a wrench.

Next, you’ll need to remove the old vanity if you are replacing an existing one. Turn off the water supply and disconnect the water lines and drain pipe. Once the old vanity is removed, clean the area where the new vanity will be installed.

Now it’s time to install the new vanity. Use a level to make sure that it is straight and then use the drill to secure it to the wall. Connect the water lines and drain pipe to the vanity and secure them with a wrench.

Finally, install the sink and faucet according to the manufacturer’s instructions. Apply a bead of silicone caulk around the edges of the sink to create a watertight seal. Let the caulk dry completely before using the vanity.

If your bathroom sink drain is damaged or outdated, it may be time to replace it. Here’s a guide on how to replace a bathroom sink drain, brought to you by This Old House and its expert team of plumbers.

The first step is to remove the old drain. Use a wrench to loosen and remove the nut that holds the drain in place. Once the nut is removed, the drain should be easy to pull out.

Next, clean the area where the new drain will be installed. Then, apply a thin layer of plumber’s putty around the base of the new drain. Place the drain into the opening and press down firmly to secure it in place.

Under the sink, attach the nut to the drain and tighten it with a wrench. This will hold the drain in place and create a watertight seal. Connect the drain pipe to the bottom of the drain and tighten it with a wrench.

Finally, apply a bead of silicone caulk around the edges of the drain where it meets the sink to create a watertight seal. Let the caulk dry completely before using the sink.

If your bathroom sink is draining slowly, it may be caused by a clog or buildup in the pipes. Here’s a guide on how to fix a slow draining bathroom sink, brought to you by This Old House and its expert team of plumbers.

The first step is to remove any visible debris from the sink. Use a pair of tweezers, a paper clip, or a small wire to remove any hair, soap scum, or other materials that may be clogging the drain.

If the sink is still draining slowly, you may need to use a plunger to loosen and remove the clog. Fill the sink with a few inches of water to create suction, then place the plunger over the drain and push down and pull up several times. This should dislodge the clog.

If the plunger does not work, you may need to use a drain snake to remove the clog. Insert the drain snake into the drain and use a crank or handle to push it through the pipes and break up the clog.

If the clog is still persistent, you may need to use a chemical drain cleaner to dissolve the clog. Follow the instructions on the product carefully and use caution when handling and disposing of the cleaner.

If your bathroom sink stopper is broken or missing, it may be time to replace it. Here’s a guide on how to install a bathroom sink stopper, brought to you by This Old House and its expert team of plumbers.

The first step is to remove the old stopper. This can usually be done by unscrewing it from the drain. If it is stuck, you may need to use pliers to loosen and remove it.

Next, clean the area where the new stopper will be installed. Then, attach the new stopper to the drain according to the manufacturer’s instructions. This may involve using a screw or other attachment mechanism.

Under the sink, you will see a lever or knob that controls the stopper. Connect the new stopper to this lever or knob and test it to make sure it is working properly.

Finally, adjust the stopper height if necessary by loosening the nut under the sink and moving the stopper up or down. Once it is at the desired height, tighten the nut to secure it in place.

If your bathroom sink is damaged, it may be possible to repair it instead of replacing it. Here’s a guide on how to repair a bathroom sink, brought to you by This Old House and its expert team of plumbers.

The first step is to assess the damage. If the sink is cracked or has holes, it may not be repairable. However, if the damage is minor, you may be able to fix it yourself.

If the damage is small, you can use a sink repair kit to fill in the damaged area. Follow the instructions on the kit carefully to ensure a proper repair. Once the repair is complete, let it dry completely before using the sink.

If the damage is more extensive, you may need to replace the sink entirely. Follow the steps in our previous section on how to install a bathroom sink to properly install the new sink.