Explore 61+ Charming Replace Kitchen Fluorescent Light With Can Light You Won't Be Disappointed

Are you tired of the harsh and unflattering light from your fluorescent kitchen fixture? Are you ready to upgrade to a more modern and stylish lighting option? Look no further than recessed lighting. This type of lighting not only provides better lighting for your kitchen but also adds a touch of elegance and sophistication to the space. Here's how you can easily replace your fluorescent light fixture with recessed lighting.

Step 1: Gather Your Materials

The first step is to gather all the necessary materials for the job. This includes recessed lighting fixtures, a drill, a saw, wire strippers, wire nuts, and a voltage tester. Make sure to choose LED recessed lights for energy efficiency and long-lasting brightness.

Step 2: Turn Off the Power

Before starting any electrical work, turn off the power to the room at the circuit breaker. Use a voltage tester to double-check that there is no electricity running to the light fixture.

Step 3: Remove the Old Fixture

Using a screwdriver, remove the screws holding the old fluorescent fixture in place. Carefully disconnect the wiring and remove the fixture from the ceiling. If the fixture is attached with screws, remove them as well.

Step 4: Measure and Cut the Hole

Using a measuring tape, determine the size and placement of the recessed lighting fixtures. Mark the spot with a pencil and use a saw to cut a hole in the ceiling. Be sure to follow the manufacturer's instructions for the proper size hole.

Step 5: Connect the Wires

Using wire strippers, remove about half an inch of insulation from the ends of the wires. Connect the black wires together and the white wires together using wire nuts. Secure the connections with electrical tape for added safety.

Step 6: Install the Recessed Light

Insert the recessed light into the hole, making sure the wires are tucked neatly inside. Use a drill to secure the light in place. Repeat the process for each recessed light you are installing.

Step 7: Turn the Power Back On

Once all the lights are installed, turn the power back on at the circuit breaker to test the lights. If they don't turn on, double-check all connections and make sure the power is on.

Step 8: Enjoy Your New Lighting

Congratulations, you have successfully replaced your old fluorescent light fixture with recessed lighting! Turn off the lights and enjoy the new ambiance in your kitchen. You can now say goodbye to the harsh and unflattering fluorescent light and hello to a more modern and stylish lighting option.

If you have fluorescent lighting in your home, you may have noticed that it is not the most aesthetically pleasing option. Fluorescent lights can be harsh and unflattering, and they may also flicker or buzz. Thankfully, replacing fluorescent lighting with recessed lighting is a relatively easy and affordable upgrade. Here's how you can make the switch in no time.

Step 1: Gather Your Materials

Before getting started, make sure you have all the necessary materials on hand. This includes recessed lighting fixtures, a drill, a saw, wire strippers, wire nuts, and a voltage tester. Choose LED recessed lights for energy efficiency and long-lasting brightness.

Step 2: Turn Off the Power

Start by turning off the power to the room at the circuit breaker. Use a voltage tester to double-check that there is no electricity running to the light fixture.

Step 3: Remove the Old Lighting

Using a screwdriver, remove the screws holding the old fluorescent lights in place. Carefully disconnect the wiring and remove the fixtures from the ceiling. If the fixtures are attached with screws, remove them as well.

Step 4: Measure and Cut the Holes

Measure and mark the placement of the recessed lighting fixtures on the ceiling. Use a saw to cut the holes, following the manufacturer's instructions for the proper size hole.

Step 5: Connect the Wires

Strip about half an inch of insulation from the ends of the wires using wire strippers. Connect the black wires together and the white wires together using wire nuts. Secure the connections with electrical tape for added safety.

Step 6: Install the Recessed Lights

Insert the recessed lights into the holes, making sure the wires are neatly tucked inside. Use a drill to secure the lights in place. Repeat the process for each recessed light you are installing.

Step 7: Turn the Power Back On

Once all the lights are installed, turn the power back on at the circuit breaker to test the lights. If they don't turn on, double-check all connections and make sure the power is on.

Step 8: Enjoy Your New Lighting

Congratulations, you have successfully replaced your old fluorescent lighting with recessed lighting! Turn off the lights and admire the new ambiance in your home. Say goodbye to harsh fluorescent lights and hello to a more modern and stylish lighting option.

LED lighting has become increasingly popular in recent years due to its energy efficiency and long lifespan. If you have fluorescent lighting in your home, you may be wondering if it's possible to convert it to LED. The good news is, it is possible and relatively easy to do. Here's how you can convert your fluorescent light fixture to LED.

Step 1: Gather Your Materials

Before starting, make sure you have all the necessary materials on hand. This includes LED light tubes, a drill, a saw, wire strippers, wire nuts, and a voltage tester. Make sure to choose LED light tubes that are compatible with your fixture.

Step 2: Turn Off the Power

Start by turning off the power to the room at the circuit breaker. Use a voltage tester to double-check that there is no electricity running to the light fixture.

Step 3: Remove the Old Lights

Using a screwdriver, remove the screws holding the old fluorescent lights in place. Carefully disconnect the wiring and remove the light tubes from the fixture. If the fixture is attached with screws, remove them as well.

Step 4: Measure and Cut the LED Tubes

Measure and mark the length of the LED tubes to fit your fixture. Use a saw to cut the tubes to the correct size.

Step 5: Connect the Wires

Strip about half an inch of insulation from the ends of the wires using wire strippers. Connect the black wires together and the white wires together using wire nuts. Secure the connections with electrical tape for added safety.

Step 6: Install the LED Tubes

Insert the LED tubes into the fixture, making sure the wires are neatly tucked inside. Use a drill to secure the tubes in place.

Step 7: Turn the Power Back On

Once the LED tubes are installed, turn the power back on at the circuit breaker to test the lights. If they don't turn on, double-check all connections and make sure the power is on.

Step 8: Enjoy Your New LED Lights

Congratulations, you have successfully converted your old fluorescent light fixture to LED! Turn off the lights and admire the new energy-efficient and long-lasting lighting in your home.

Looking for a more versatile and customizable lighting option for your kitchen? Consider replacing your old fluorescent light with a track light. Track lighting allows you to direct light exactly where you need it, making it perfect for highlighting specific areas in your kitchen. Here's how you can easily replace your fluorescent light with a track light.

Step 1: Gather Your Materials

Before getting started, make sure you have all the necessary materials on hand. This includes a track light kit, a drill, a saw, wire strippers, wire nuts, and a voltage tester. Choose a track light kit that is compatible with your electrical system.

Step 2: Turn Off the Power

Start by turning off the power to the room at the circuit breaker. Use a voltage tester to double-check that there is no electricity running to the light fixture.

Step 3: Remove the Old Fixture

Using a screwdriver, remove the screws holding the old fluorescent fixture in place. Carefully disconnect the wiring and remove the fixture from the ceiling. If the fixture is attached with screws, remove them as well.

Step 4: Measure and Cut the Hole

Measure and mark the placement of the track light on the ceiling. Use a saw to cut a hole in the ceiling for the track light to fit into.

Step 5: Connect the Wires

Strip about half an inch of insulation from the ends of the wires using wire strippers. Connect the black wires together and the white wires together using wire nuts. Secure the connections with electrical tape for added safety.

Step 6: Install the Track Light

Insert the track light into the hole, making sure the wires are neatly tucked inside. Use a drill to secure the light in place.

Step 7: Turn the Power Back On

Once the track light is installed, turn the power back on at the circuit breaker to test the light. If it doesn't turn on, double-check all connections and make sure the power is on.

Step 8: Adjust the Track Heads

Most track lights come with adjustable heads that can be directed to different areas. Adjust the track heads to your desired position to highlight specific areas in your kitchen.

Step 9: Enjoy Your Customizable Lighting

Congratulations, you have successfully replaced your old fluorescent light with a track light! Turn off the lights and admire the new versatility and customization of your kitchen lighting.

Pendant lights are a great way to add a touch of elegance and style to any room. If you're tired of your old fluorescent kitchen lighting, consider replacing it with a pendant fixture. Pendant lights come in a variety of styles and can instantly transform the look of your kitchen. Here's how you can easily replace your fluorescent light with a pendant fixture.

Step 1: Gather Your Materials

To get started, make sure you have all the necessary materials on hand. This includes a pendant light, a drill, a saw, wire strippers, wire nuts, and a voltage tester. Choose a pendant light that fits your personal style and is compatible with your electrical system.

Step 2: Turn Off the Power

Start by turning off the power to the room at the circuit breaker. Use a voltage tester to double-check that there is no electricity running to the light fixture.

Step 3: Remove the Old Fixture

Using a screwdriver, remove the screws holding the old fluorescent fixture in place. Carefully disconnect the wiring and remove the fixture from the ceiling. If the fixture is attached with screws, remove them as well.

Step 4: Measure and Cut the Hole

Measure and mark the placement of the pendant light on the ceiling. Use a saw to cut a hole in the ceiling for the pendant light to fit into.

Step 5: Connect the Wires

Strip about half an inch of insulation from the ends of the wires using wire strippers. Connect the black wires together and the white wires together using wire nuts. Secure the connections with electrical tape for added safety.

Step 6: Install the Pendant Light

Insert the pendant light into the hole, making sure the wires are neatly tucked inside. Use a drill to secure the light in place.

Step 7: Turn the Power Back On

Once the pendant light is installed, turn the power back on at the circuit breaker to test the light. If it doesn't turn on, double-check all connections and make sure the power is on.

Step 8: Adjust the Height of the Light

Pendant lights often come with adjustable cords or chains to adjust the height of the light. Adjust the height to your desired length to achieve the perfect look for your kitchen.

Step 9: Enjoy Your Stylish New Lighting